Wooden windows

MARK outer closings logo of a structural match European standards.

Wood components in the final thickness of 68mm are made up of softwood lumber oak combined length or combined length resinous core brought to 12% relative humidity, consists of three layers was made by pasting adhesive category D3, waterproof.

Specific sections are: 60/68, 80/68, 90/68, 120/68, 180/68 mm.

1. Glass windows:
Outdoor enclosures are equipped with glass windows of the building or 4 16 4 mm float, there are many options in the type of glass used (transparent, tinted, reflective window films, sandblasting, bombs, etc.). For the case in certain positions according to the design of execution countersigned by the buyer, decorative moldings can be mounted between two glass surfaces.
The bottle is mounted in bed weather resistant silicone, thereby ensuring the complete sealing and durable

2. Insulated glass slats fixing:
Glass windows are installed and fastened in the frame fixed or mobile frame with glass slats. This stave is well defined size and shape sections and section frieze of which is built close that. Stave is made of wood with the same quality and technical characteristics as the rest of timber used to manufacture closures.
Stave will be fixed with staples Type I shot with equipment specifically designed for this surgery technique.

3. Hardware:
Operation, proper closure and thereby minimize the heat provided by the hardware products conferred MARK ROTO-CENTRO 101, which provide 10 years warranty manufacturer are ISO 9001.
Entrance doors to compulsorily equipped with multipoint locking hardware security with the central command ROTO, KFV, GU
Sliding doors shall be equipped with fittings GU.
Fittings ensure easy handling of doors and windows are available as side opening, hinged, tilt-swing gates and by additional elements (means of ventilation, the possibility of closing the window handle key) greets special demands.
Adjustable screws enable a fine adjustment, thereby ensuring faultless operation of moving parts.

4. Ghedi of sealing:
Ghederele of sealing, both at primary and secondary are German and Swedish origin, manufactured according to ISO 9001 prescribed. Gederathite is made from Elasto-polymer as wear-resistant, thus guaranteeing capacity of aging delayed for many years. ensure good sealing. Also, are included in the ISO 14001 standards on environmental protection.
Color Gederathite will be in keeping with the finish closures ordered

5. DROP aluminum flush in boxes below:
Profile DROP Gutmann Gutmann Neckar and Rems window door, made as prescribed by ISO 9001 standards. Picuratorul is intended to evacuate meteoric water that reaches the exposed parts of the windows and doors at the rain will be no opportunity to infiltrate moisture rooms.

Surface finish:
MARK finished products are delivered. Finish closures run exclusively only professional range REMMERS Finnish products, leading in the field. Products are certified ISO 9001.
Finish may be after the election:
A - Lazur UV resistant color for customer choice of color palette REMMERS (not fade in time), besides aesthetic value Lazur that offer real protection against fading wood xylofage insects, fungi that cause wood staining.
- Lake flexible UV resistant, with excellent coverage achieved for exposed wooden surfaces rain and sunlight
B - treated with the role of conservation, elastic paint primer that elastic catalyst recommended for weather exposed exterior.

Very easy.
- Monthly is recommended by the joiner remove dust with a brush or a whisk electrostatic.
- Whenever necessary, after dusting, cleaning will be carried carpentry by washing with a sponge or a wet cloth.

The finished product is protected with corrugated cardboard and the pieces one by one are packed in foil contract.