Making blinds

Blinds - the simplest forms of blinds - you can buy in shops, where in various shapes and patterns or you made them yourself Before you begin, calculate the amount of material required, measuring the height and width windows frames and adding 10% extra material and 30 cm length, required to arrange jaluzelei around the roller and sipcii. In addition, you will need these tools to work: roulette, small blades, scissors, skins, sewing machines, pastes and materials: kit for blinds (contains the rule: a roll of wood (or metal) and brackets fixation), fabric, dressing as the spay, attached.

First of all as supported store (the kit for blinds), following manufacturer's instructions, it is very possible that roller kit may not fit the window so we need to measure the distance between the media and roll cut to size needed, with saws . The next step consists in cutting the material to proper size, considering the above arrangements and dressing it in accordance with instructions from the spray. After this let it dry material.

Once dried and hardened, the material will be measured on the outline and will draw lines with chalk tailoring guide. Cut fabric to size needed to store, with care not to bend it or wrinkled. Measure circumference sipcii, depending on which make a seam on the back side of the material and lock it with Boldur. Before the hem stitch, laid stave in it to ensure that they match. Make a sign in place to cut shingles, if it is too long and bring the right size with a saw. Sanding irregular edges with sandpaper sipcii.

After stave remove the seam, it coaseti straight line, using thread the same color as the material for awnings. Since it is very hard, because dressed, beware that the material does not buckle or bend.

Removed the paper covering the sticky side of the roller and attached material carefully, so that presandu it stick to the roll. If the roll is made of wood, then the fabric can be fixed with adhesive on it, but for added security recommended drop material using staples. Then toss the roll material, keeping a fixed (while the material will be used).

Enter stave to hem Store and stoppers seated attachment to its ends. Fix blinds to the holder, then lift them and get off them easy to check if it works.

Have Luck!